All Flash File,
Samsung Galaxy J1 2016 Usb Charging Problem Solution Jumper Ways
Samsung Galaxy J1 2016 Usb Charging Problem Solution Jumper Ways
Problem:-
Samsung Galaxy J1 2016 usb charging solution,
Samsung Galaxy J1 2016 usb not recognised not detected
Samsung Galaxy J1 2016 Usb Charging Problem Solution Jumper Ways
Diagnostics:-
Plug in usb cable into PC and Phone jack, Read notifications on the screen phone recognised or not. Check out you can save data to memory card or not. Replace usb data cable and try again.
Replace Usb charger and try again can it charge or not.
Solution:-
If you are facing charging problem in Samsung Galaxy J1 2016 and have test all above steps to solve this problem in it. Dis assemble the phone and then look at phone for water and carbon damages. Make it clean with electronics cleaner and apply heat with heat gun to make it dry.
Keep in mind heat should not be more and much because it can harm your skin and damage the mother board. So keep it in normal flow and look at the parts carefully.
Track all these paths and components as shown in diagram above. all these tracks are given in different colors so that you can find out the jumper ways easily.
Samsung Galaxy J1 2016 usb charging solution,
Samsung Galaxy J1 2016 usb not recognised not detected
Samsung Galaxy J1 2016 Usb Charging Problem Solution Jumper Ways
Diagnostics:-
Plug in usb cable into PC and Phone jack, Read notifications on the screen phone recognised or not. Check out you can save data to memory card or not. Replace usb data cable and try again.
If you are facing charging problem in Samsung Galaxy J1 2016 and have test all above steps to solve this problem in it. Dis assemble the phone and then look at phone for water and carbon damages. Make it clean with electronics cleaner and apply heat with heat gun to make it dry.
Samsung Galaxy J1 2016,Usb,Charging,Problem,Solution,Jumper,Ways
Samsung Galaxy J1 2016, usb not charging, Usb not recognized, charging not save, not charging
- Next Samsung Galaxy J1 2016 LCD Display Light IC Solution Jumper Problem Ways if lcd light is not workin in Samsung Galaxy J1 2016 then we will not be able to watch any text on display.light can be dim or may be blank.Samsung Galaxy J1 2016 LCD Display Light IC Solution Jumper Problem Ways can be solve in a few steps as given in this post Samsung Galaxy J1 2016 LCD Display Light IC Solution Jumper Problem Ways after dis assambling Samsung Galaxy J1 2016 chek mother board if there is any carbon water damage or rust.clean whole board with electronics cleaner and then apply hot air for a few mints so that it can be dry. replae led if it is a jack lcd and if it is pasted then after removing check its prints value.if value is ok then replae lcd and if alue is missing then check whole parts componenets as iven in above diagram.check all paths and if any tracks of them is missing apply jumpers. it will help you to solve Samsung Galaxy J1 2016 LCD Display Light IC Solution Jumper Problem Wayseasly. For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone. Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.
- Previous Samsung Galaxy Mega 6.3 I9200 Usb Charging Problem Solution Jumper Ways Problem:-Samsung Galaxy Mega 6.3 I9200 usb charging solution,Samsung Galaxy Mega 6.3 I9200 usb not recognised not detected Samsung Galaxy Mega 6.3 I9200 Usb Charging Problem Solution Jumper Ways Diagnostics:-Plug in usb cable into PC and Phone jack, Read notifications on the screen phone recognised or not. Check out you can save data to memory card or not. Replace usb data cable and try again. Replace Usb charger and try again can it charge or not. Solution:-If you are facing charging problem in Samsung Galaxy Mega 6.3 I9200 and have test all above steps to solve this problem in it. Dis assemble the phone and then look at phone for water and carbon damages. Make it clean with electronics cleaner and apply heat with heat gun to make it dry. Keep in mind heat should not be more and much because it can harm your skin and damage the mother board. So keep it in normal flow and look at the parts carefully. Track all these paths and components as shown in diagram above. all these tracks are given in different colors so that you can find out the jumper ways easily.
About author
